- Trade name
- Compound LOSK-O
- Standard documentation
- Specs 38.403820-95
- Application area
- Protection of semiconductor member face in power electronics
- Appearance
- Viscous-flow brown liquid without foreign inclusions
- Technical specification
- 38.403820-95
- Specifications
Indices Values Dynamic viscosity, Pa.s 9,0-12,0 Tensile strength, MPa, min 1,0-1,3 Elongation at break, %, min 120 Full curing time at 170oC, h, max 8 In storage filler sedimentation is allowed, which disperses back when stirred. LOSK-O vulcanizates do not change their properties within the range from -55 to +250oC. Volume resistivity, Ohm.cm 10E14 Dissipation factor, max 0,01 - Safety Requirement
- LOSK-O is a paste comprising low-molecular siloxane raw rubber, filler and processing aids. The paste is non-volatile, non-explosive, not self-ignitable, burns in fire only, is stable in the environment and under specified conditions of use.
- Storage conditions
- Keep rubber indoors at both manufacturer’s and user’s below 30oC.
- Warranty period of storage
- 3 months from the date of manufacture
- Delivery and price
- Rubber is delivered in PE jerrycans (OST 6-19-35-81) of 1 – 5 dm3 capacities, then in wooden crates (GOST 5959-80, П-1 or GOST 18573-86, V-1) or in post boxes. Rubber is supplied on prepaid request at a negotiated price adjusted depending on feedstock cost.
- Occupational Safety and Health
- Alizarin falls into 3 Class of Hazard by impact to people (GOST 12.1.007-76), exposure limit being 5mg/l. Working area must have fire fighting means and plenum-exhaust ventilation with air exchange rate at least 6. Moreover, places of would-be air pollution with toxic matters must have local ventilation with air suction no less than 0.7m/s. Special clothes recognized for chemical works must be worn. Special requirements for personal hygiene are not specified, though rubber gloves recommended to avoid skin contact.
- Application manual
- Rubber compound should be vulcanized for 8 hrs at +170oC.