Federal State Unitary Enterprise
«S.V. Lebedev Institute of Synthetic Rubber»

+7 (812) 372−64−90

Compound 10-145

Compound 10-145 is intended for sealing radio- and electronic devices, cathode-ray and photovoltaic included, within the range from -60oC to +100oC.

Cured compound is elastic, highly resistant to moisture, has a low glass transition temperature (not higher than - 65oC) and density 1.0-1.1 g/cm3.

Trade name
Compound 10-145
Standard documentation
Specs. 38.103437-80
Appearance
Uniform opaque yellowish or light brown material. Cured by adding 2-component catalyst at site of use.
Technical specification
38.103437-80
Specifications
IndicesValues
- tensile strength, MPa (kg/cm2), min4,9 (50)
- elongation at break, %, min50
- elongation set, %, max25
Dielectric properties at 20oC
- dissipation factor, 1000Hz, max0.01
- dielectric constant, 1000Hz, max3.5
- volume resistivity, Ohm x cm, min10E13
Storage conditions
Keep in warehouse at max. 25oC
Occupational Safety and Health
Compound contains unbound 102-T product (toluylene diisocyanate) whose exposure limit is 0.05 mg/m3. Curing catalysts are placed into 3rd class of hazard. Allowing for a high toxicity of the both compound constituents, all the steps of compound preparation, packaging, transportation and storage must be extremely tight. Before use get aware with relevant safety rules.