Designed to be applied on metal, concrete, reinforced- concrete, glass-plastic, wooden and other structures as impact resistant durable elastic coats, to make seals and damping gaskets. Serviceable (from -70 to +100)oC.
Used for rust protection of industrial and chemical machinery, as well as to prevent water erosion from turbine-wheels, pumps, etc.
Usable in reservoirs and systems of public- drinking water supply.
- Trade name
- olyurethane composition Lyturen-165
- Standard documentation
- Specs.2257-o88-0051063-2002 Safety data sheet # 78.01.06.225.T.002240.07.08 from 01.07.2008
- Appearance
- Component 1 – urethane prepolymer – amber colored liquid, honey-like by consistency, neither mechanical inclusions, nor blobs present. Component 2 – curative – brown liquid free from foreign inclusions.
- Technical specification
- 2257-088-00151963-02
- Specifications
Indices Values Uncured composition Pot life, minutes, min 60 Cured composition Tensile strength, MPa, min 15.7 Elongation at break, %, min 300 Elongation set, %, max 15 Metal bond strength (by peeling), kN/m, min 7,0 Shore A hardness, arb. units 75-85 Change in mass, %, max, exposed to: (1200 hrs, 20oC) water 2,0 Change in mass, %, max, exposed to: (1200 hrs, 20oC) hydrochloric acid (20% sol.) 1,5 Change in mass, %, max, exposed to: (1200 hrs, 20oC) sulfuric acid (20% solution) 1,1 Change in mass, %, max, exposed to: (1200 hrs, 20oC) KOH (20% solution) 1,1 Change in mass, %, max, exposed to: (1200 hrs, 20oC) seawater 1,7 Change in mass, %, max, exposed to: (1200 hrs, 20oC) petrol vapors 5,0 Hydro-abrasion wear resistance factor, E 10 Volume resistivity, Ohm.cm, within 1*10Е13, 5*10Е13 - Safety Requirement
- Компоненты композиции невзрывоопасены, самопроизвольно не воспламеняются, горят только при внесении в источник огня, боятся влаги.
- Storage conditions
- Keep prepolymer in air- tight containers, with no access of moisture and direct sunlight, at (-60 ÷ +40)oC. Shelf life is 6 (six) months from the date of manufacture. Curative shall be kept in manufacturer’s containers, dry and cool, at no higher than 50oC and for not longer than 12 (twelve) months from the date of manufacture.
- Warranty period of storage
- Over 10 years
- Delivery and price
- The components come complete: 35-40 mass parts of curative per 100 m.p. of prepolymer. Composition is prepared by mixing the components just before use. At customer’s will compositions are completed with proper primers. 1.3kg/m2 of the composition goes into making 1mm-thick coat, wastes are allowed for.
- Auxiliary information
- Attention to consumers! FGUP “NIISK” only owns the right to advertise and sell Lyturen-165 composition. FGUP “NIISK” does not bear the responsibility for the quality of products purchased elsewhere. Beware of forgeries!